Search ..

Product

Our aluminium products meets international top standars with maxium variety of alloys,formuations and shapes from 1-8 series

Aluminum foil for eater
Aluminum foil for eater
Aluminum foil for eater
Aluminum foil for eater
Aluminum foil for eater
Aluminum foil for eater

Aluminum foil for eater

  • Loading PortQingDao
  • Alloy1-8 Series
  • Payment TermsTT or LC
  • Supply Capability100000 m.t./month
  • CompanyWorthWill Aluminum CO., LTD.

Product Description:

Aluminium foil acts as a total barrier to light and oxygen (which cause fats to oxidise or become rancid), odours and flavours, moistness, and germs, it is used broadly in food and pharmaceutical packaging. The purpose of aluminium is to make long-life packs (aseptic processing|aseptic packaging) for drinks and dairy goods, which allows storing without refrigeration. Aluminium foil containers and trays are used to bake pies and to pack takeaway meals, ready snacks and long life pet foods.

Aluminium foil is widely sold into the consumer market, often in rolls of 500 mm (20 in) width and several metres in length.It is used for wrapping food in order to preserve it, for example, when storing leftover food in a refrigerator (where it serves the additional purpose of preventing odour exchange), when taking sandwiches on a journey, or when selling some kinds of take-away or fast food. Tex-Mex restaurants in the United States, for example, typically provide take-away burritos wrapped in aluminium foil.

Aluminium foils thicker than 25 μm (1 mil) are impermeable to oxygen and water. Foils thinner than this become slightly permeable due to minute pinholes caused by the production process.

Aluminium foil has a shiny side and a matte side. The shiny side is produced when the aluminium is rolled during the final pass. It is difficult to produce rollers with a gap fine enough to cope with the foil gauge, therefore, for the final pass, two sheets are rolled at the same time, doubling the thickness of the gauge at entry to the rollers. When the sheets are later separated, the inside surface is dull, and the outside surface is shiny. This difference in the finish has led to the perception that favouring a side has an effect when cooking. While many believe that the different properties keep heat out when wrapped with the shiny finish facing out, and keep heat in with the shiny finish facing inwards, the actual difference is imperceptible without instrumentation.The reflectivity of bright aluminium foil is 88% while dull embossed foil is about 80%.

We provide a full range of precision aluminum strip for almost any application. We produce aluminum strip in a wide variety of alloys, including clad composites. Our aluminum strip can be produced in standard dimensions or custom made to your special requirements. We produce both imperial and metric units. We manufacture in compliance with the main international specifications, and tighter tolerances or custom tempers are available upon request. We offer various surface conditions, custom finishes (painting, anodizing, embossing), special processing, and multiple packaging options to meet our customer's unique requirements. The following is a summary of our capabilities.

Manufactured in compliance with the main international specifications and standards, including:  Aluminum Association, ASTM, EN, and DIN.
We can also manufacture in compliance with other international standards including:ASME, SAE, AMS, AWS, FED, MIL, QQ, ISO, BS, AFNOR, JIS and GOST.

Manufactured in compliance with the main international specifications and standards.
Tighter tolerances are available upon request.


Aluminium (or aluminum; see spelling differences) is a chemical element in the boron group with symbol Al and atomic number 13. It is a silvery white, soft, ductile metal. Aluminium is the third most abundant element (after oxygen and silicon), and the most abundant metal in the Earth's crust. It makes up about 8% by weight of the Earth's solid surface. Aluminium metal is so chemically reactive that native specimens are rare and limited to extreme reducing environments. Instead, it is found combined in over 270 different minerals.The chief ore of aluminium is bauxite.

Aluminium is remarkable for the metal's low density and for its ability to resist corrosion due to the phenomenon of passivation. Structural components made from aluminium and its alloys are vital to the aerospace industry and are important in other areas of transportation and structural materials. The most useful compounds of aluminium, at least on a weight basis, are the oxides and sulfates.

Despite its prevalence in the environment, no known form of life uses aluminium salts metabolically. In keeping with its pervasiveness, aluminium is well tolerated by plants and animals. Owing to their prevalence, potential beneficial (or otherwise) biological roles of aluminium compounds are of continuing interest.

The earliest citation given in the Oxford English Dictionary for any word used as a name for this element is alumium, which British chemist and inventor Humphry Davy employed in 1808 for the metal he was trying to isolate electrolytically from the mineral alumina. The citation is from the journal Philosophical Transactions of the Royal Society of London: "Had I been so fortunate as to have obtained more certain evidences on this subject, and to have procured the metallic substances I was in search of, I should have proposed for them the names of silicium, alumium, zirconium, and glucium."

Davy settled on aluminum by the time he published his 1812 book Chemical Philosophy: "This substance appears to contain a peculiar metal, but as yet Aluminum has not been obtained in a perfectly free state, though alloys of it with other metalline substances have been procured sufficiently distinct to indicate the probable nature of alumina."[69] But the same year, an anonymous contributor to the Quarterly Review, a British political-literary journal, in a review of Davy's book, objected to aluminum and proposed the name aluminium, "for so we shall take the liberty of writing the word, in preference to aluminum, which has a less classical sound."

The -ium suffix conformed to the precedent set in other newly discovered elements of the time: potassium, sodium, magnesium, calcium, and strontium (all of which Davy isolated himself). Nevertheless, -um spellings for elements were not unknown at the time, as for example platinum, known to Europeans since the 16th century, molybdenum, discovered in 1778, and tantalum, discovered in 1802. The -um suffix is consistent with the universal spelling alumina for the oxide (as opposed to aluminia), as lanthana is the oxide of lanthanum, and magnesia, ceria, and thoria are the oxides of magnesium, cerium, and thorium respectively.

The aluminum spelling is used in the Webster's Dictionary of 1828. In his advertising han dbill for his new electrolytic method of producing the metal in 1892, Charles Martin Hall used the -um spelling, despite his constant use of the -ium spelling in all the patentsiled between 1886 and 1903. It has consequently been suggested[by whom?] that the spelling reflects an easier-to-pronounce word with one fewer syllable, or that the spelling on the flyer was a mistake.[citation needed] Hall's domination of production of the metal ensured that aluminum became the standard English spelling in North America.

Q:My truck vibrates when i accelerate from stop, then my brake lights come on?
I've often wondered this myself and intend to build such a sphere one dayMost likely the light continues to reflect everywhere and if you opened your eyes while inside there would be nothing but light, all the colours of what your wearing and yourself would blend together from every possible angle of reflection (and in a sphere there's an infinite amount) and the light would most likely be intense enough to blind you.
Q:Science help please and thank you so much?
I thank science for football I thank science for girls I thank science for many things Science is da best
Q:How to make brownies Christmas-y?
The reason I do not use UNDER the Tank Heaters is due to some incidents that went badly in the past and the reptiles that i use heating pads for now, I stick to the side of the tank on the same side as the tank that i use as the basking area, where the reptile (Snake or lizard) can go to rub and get extra warmthAnd also,when you stick a heating pad on the side of a tank, it's permanent, you remove it, and it will no longer workI put as far down to the edge of tank to corner as it will goVery simple for heat source, This is what i use for the newer smaller reptiles/snakes, I use the dual heating lamps that are attached to the same lamp head , you can get at petcoAnd use a red and white bulbThey are both on during the day, and i cut off the white (Hotter bulb) at night, so the red one provides some light and less heatI have the dual lamp on the left side of the tank to keep it the hottest for the basking area where the heating pad on the side is also placedI keep 2 thermometers, one on each side of tank to keep an eye on heatAround 85 on his basking side during the day, and 70 at nightYou can also just buy the kit, when you go to the pet store they can help you outAlso those Dual lamps you can buy a stand for 30 to hang it onI rig my own, if you need to know how to do that, email meI buy a few items, a screw driver, and a few clips from the dollar store, and wa la !
Q:How to make fire from wet wood?
This Site Might Help YouRE: How to make fire from wet wood? n place where I usually camp there are only completely soaked or rotten woodIt is almost impossible to find dry kindlingLast time I was building fire I managed to make a small fire with candle and lots of kindlingAfter that I build huge quot;shelterquot; over it of wet/rotten wood hopping.
Q:Does anyone know how to make a steam roller?
prepare lunch at your home and bring it to your work
Q:What's the aluminum foil tape in hydropower decorating material?
It's the thermal insulation material mninly used to twine pipelines like water pipe and smoke vent.
Q:Trunk lock removal/installation?
Open the trunk up and there should be U shaped clip that holds it in place,, now take a big long screw driver and place it up in there(,if you can not get anything else up there) now you take the screw driver and pry up on the top side of the U clamp and it should slide straight up ,,Now if you get the U clamp off the lock cylinder will come out from the outside, Be sure that you do not damage the rubber gasket on the outside unless you have a new one with the other cylinderJust reverse every thing when you put the new one inMake sure you line the long flat rod on the back of the new lock up right or it will not go in ,it should go in easy if is lined up right .b.Jerry30
Q:Is it okay to leave a horse in her stall if it's 90 degrees and raining?
She should be fine in therethe only thing to ask would be if her stall is made of aluminum or some type of metal? if so the temperature inside the stall could be hotter than your predicted forecast.
Q:Basic Chemistry Conversion?
Remember, that percent means parts per hundred, so you would have 52.7g of Al; 47.1g of Oxygen; and .2g of ChromiumThis would make your ruby 100gTo do your conversion start with what you have, which is .125g of Aland you know that for every 100g ruby you have 52.7g of Aluminum Heres how I would set up the problem: .125g Al x 100g Ruby/52.7g Al (The Al would cancel out leaving you with the mass of the ruby in grams.) I got that the ruby should weigh .237g If you used your answer of .237g to find out how many grams of Oxygen were in a ruby of that mass, it would look like this (remember we know how much oxygen is a ruby of 100g, so we can use that as a conversion factor): .237g Ruby x 47.1 g Oxygen/100g Ruby .112g Oxygen If you add this with the amount of Al, you get the mass of the ruby- .125g Al + .112 g O .237 As far as the unit conversions go, just remember that The units you want to finish with need to be on top Hope that helps!
Q:What kind of clay will stick to styrofoam?
Polymer clay will stick, unfortunately the foam shrinks when heated to bake the polymerYou might try a test run with Bondo, the epoxy material used to repair carsAnd actually, you might be better off making the head by carving soft wood - the traditional material.
Get An Instant Quotation

For all inquiries, please fill in the form below (* are required) to send us a brief message, and we will get back to you as soon as possible.

Name:
* Email:
Tel   :
Country:
 

RECOMMENDED PRODUCTS

1
Click to contact us

X Close

Name:
* Email:
Tel   :
Country: