1050 H24 0.005 Thickness Aluminum Sheet Alloy Plate

Item specifice:

Grade:	2000 Series,5000 Series,7000 Series,4000 Series	Surface Treatment:	Coated,Mill Finish	Shape:	Angle,Oval
Temper:	T3-T8,Soft,Half Hard	Application:	Decorations,Glass Wall,Pharmaceutical	Technique:	Extruded
Thickness:	0.05-4.0mm	Width:	900--1500mm	Outer Diameter:	450-600
Net Weight (kg):	2.5 ton	Packaging:	Wooden pallets

Name	3003 Aluminum Coil
ALloy or Not	Yes
Alloy	1100H-18, 3003-H24,3003-H26,3005-H26,8011,3004,3105,5005,etc.
Thickness	0.1~1.5mm
Width	<2000mm< span="">
MOQ	1 MT
Coating finish	Brushed, drawing, embossed, printing
Color	As to code RAL
Surface	Embossed,Mill Finish,Coated,Brushed
Gloss	10-90%(EN ISO-2813:1994)
Total coating thick	PVDF27 ~35micron
Total coating thick	Polyester18~27micron(EN ISO-2360:1995)
Coating hardness	2H
Adhesion	5B (EN ISO-2409:1994)
Impact resistance	No cracking and peeling (A.S.T.M D2794-1993)
Flexibility (T-bend)	0T- 2T
MEK resistance	100
Certification	ISO9001:2000, CE, SGS
Coil's standard diameter	1100mm
Inner Diameter	405mm/505mm
Coil's standard weight	1MT - 2MT

Product Specification
Grade	1000 Series: 1050 1060 1100 3000 Series: 3003 3004 3105 5000 Series: 5052 5605,5083 6000 Series: 6061 6063 8000 Series: 8011 8021 8079
Thickness	0.20-8.00mm
Width	2400mm max.
Grade	1000,3000,5000,6000,8000series
Coil ID	75mm, 150mm, 200mm, 300mm, 400mm, 508mm or negotiable
Coil weight	1000-5000kgs
Coil OD	1700mm max.
Temper	O, H12, H14, H16, H111, H22 ,H24, H26, H28,T4, T6,etc.

Q:Will the surface of aluminum contact water if the aluminum coil falls into water?: You mean whether water will penetrate into the gap? If you get it out quickly, basically it will be ok. If there is something wrong, you can put it under the sun to see whether there is water oozing from the gap.

Q:How is the welding performance of 3003 aluminum coil?: 3003 aluminum coil, a kind of rust-proof aluminum, belongs to AL-Mn series alloy. With low intensity (slightly higher than commercial purity aluminum), it cannot endure heat treatment, so cold processing is adopted to increase its mechanical property: high plasticity in annealing and semi-cold hardening, low plasticity in cold hardening, good corrosion resistance., good weldability and bad machinability. It is mainly used for low load part in liquid or gaseous medium requiring high plasticity and good weldability, such as fuel tanks, gasoline or lubricant conduit. It can also be used for liquid containers and other deep drawing small load parts made by deep drawing. Aluminum wire can be used to make the rivet.3003 aluminum sheet has good formability, weldability and corrosion resistance. It is used to process parts which require good formability, corrosion resistance and weldability and lower intensity than 1xxx series alloy, such as such as kitchenware, food and chemical products processing and storage equipment, groove and tank to transport liquid product, pressure vessel and pipe processed from thin plate, cooling fin, make-up board, photocopier rollers and ship material.

Q:Rollerblade in line skates-Aluminum frames?: Technically /... that were extremely good but the deal probably fell apart when the original Mogema was dissolved.

Q:What are your opinions on recycling aluminum?: 1) Do you recycle aluminum (soda cans, etc.)? Yes, as much as possible. 2) Why do or don't you recycle aluminum? I recycle cans so the material can be reused in new products and applications. 3) Does it make a difference to the economy whether we recycle or not? Yes, it provides jobs and increases the availability of green materials which have been popular for a number of years. 4) Does it make a difference to the environment whether we recycle or not? Yes, aluminum leeching into the earth via landfill or other trash is not good. 5) What do you think would help people to recycle more? Such as a reward, information, resources, etc. Make it cool and popular to recycle. Recycling is far more prevalent now than it was 20 years ago when I started doing so on a regular basis.

Q:aluminum fact or fiction question regarding recycling?: The cans also have paint on them so a pound of cans is a pound of aluminum and paint. A pound of pull tabs is all aluminum.

Q:Can aluminum coil 3003H24 replace 3A21H14?: It is ok in some way as both of them are alumal. The hardness of 3003H24 is similar to that of 3A21H14 after hardening without annealing. Both have good corrosion resistance, plasticity and bad machinability. They cannot be used as load bearing parts even though small load is ok. They cannot be anodized.

Q:How do i clean a aluminum bicycle?: For painted metal, supports, grips, vinyl seat, tires and spokes, use a solution of 1-part Simple Green to 30-parts water — spray onto soiled areas. Wipe immediately with damp cloth to rinse, followed by dry towel — making sure to completely dry the area cleaned. My point is to show that you are supposed to cut the Simple Green with 30 parts of water. MOST people don't do this step. Simple Green (and many other cleaners) are very concentrated. NEVER clean a bicycle with this kind of cleaner without proper dilution. Read labels. Follow directions. Full strength Simple Green has enough butyl solvent to corrode bare aluminum on brake surfaces on wheels and if the wheel is too wet it can actually melt the glue of the rim strip by seeping in the spoke holes. I have seen this at bike shops a lot. The cleaner (if sprayed full strength around bearings) over spray has the potential to break down the grease -- after all it is a degreaser. Always dampen a cloth or sponge in your cleaning solution and wipe down a bike. Don't spray it.

Q:mass of 3.45 moles of Aluminum sulfate?: Aluminum sulfate is Al2S3, so you got two atoms of aluminum and three of oxygen. Hence the molar mass of aluminum sulfate is: 2X16 (two times molar mass of oxygen) + 3X32 (three times molar mass of sulfur). Keep in mind that the molar mass of an elements equals its mass number. We have 128 grams per mole or 128 pounds per lb-mol. Since you have 3.45 moles of Al2S3 you just have to do 3.45 times 128 = 441.6 grams