Aluminium Cast Coil for making aluminium foil

Item specifice:

Grade:	1000 Series,3000 Series,6000 Series	Surface Treatment:	Anodized	Shape:	Square,T-Profile
Temper:	O-H112	Application:	Transportation Tools

Product Description:

1. Structure of Aluminium Cast Coil for making aluminium foil Description
Aluminium Cast Coil for making aluminium foil is one semi-finished aluminium material. This coil can be rolled down to aluminium coil,sheet,circle ect. The alloy AA1050 is widly used in building, industry ect. Its weight is much lower than steel. So many customers choosed aluminium material instead of steel.

2. Specification of Aluminium Cast Coil for making aluminium foil

Aluminium Cast Coil for making aluminium foil
Main Specification
Alloy	AA1xxx (AA1050, AA1060, AA1070, AA1100 etc.)
	AA3xxx (AA3003, AA3004, AA3005, AA3105 etc.)
	AA5xxx, AA6XXX (AA5052,AA5083, AA5754, AA6061, AA6062 etc.)
	AA8xxx(AA8011, AA8006 etc.)
Temper	H14,H16, H18, H22, H24, H26, H32,O/F, T4, T6, T651
Thickmess	0.01mm-100mm
Width	30mm-1700mm
Standard	GB/T 3880-2006/ASTM
Special specification is available on customer's requirement

3. Application of Aluminium Cast Coil for making aluminium foil

(1).Interior: wall cladding, ceilings, bathrooms, kitchens and balconies, shutters, doors...

(2).Exterior: wall cladding, facades, roofing, canopies, tunnels,column covers , renovations...

(3).Advertisement: display platforms, signboards, fascia, shop fronts...

4. Feature of Aluminium Cast Coil for making aluminium foil

Surfact Quality :

Be free from Oil Stain, Dent, Inclusion, Scratches, Stain, Oxide Dicoloration, Breaks, Corrosion, Roll Marks, Dirt Streaks and other defect which will interfere with use,

Mechenical Property:

Chemical Composite and Mechanical Property

5. Certificate of Aluminium Cast Coil for making aluminium foil

SGS and ROHS(if client request, paid by client), MTC(plant provided), Certificate of Origin(FORM A, FORM E, CO), Bureau Veritas and SGS (if client request, paid by client), CIQS certificate

6. Image of Aluminium Cast Coil for making aluminium foil

Aluminium Cast Coil for making aluminium foil

7. Package and shipping of Aluminium Cast Coil for making aluminium foil

First, plastic cloth with drying agent inside; Second, Pearl Wool ; Third, wooden cases with dry agent , fumigation wooden pallets, aluminum surface could cover blue PVC film

8. FAQ

1) What is the delivery time?

Depends on actual order, around 20 to 35 days

2) What is the QC system:

We have QC staff of 20 persons and advanced equipment, each production is with MTC traced from Aluminum ingot lot.

3) What market do you mainly sell to?

Australia, America, Asia, Middle East, Western Europe, Africa etc

Q:What do the two items (COIL:873347 HEAT: number) on the label of the raw material of aluminum coil stand for?: COIL means aluminum coil and HEAT means heating, so together they mean hot rolled coil.

Q:What advantages does 0.1*100cm aluminum coil have? Is it suitable for the roof tiling? How is the anti-oxidation and anti-corrosion performance?: 0.1 aluminum sheet has no intensity, so 0.5-1mm colored steel is often used to make roofing.

Q:Aluminium free baking powder?

Q:Has the aluminum bat ruined USA born players?: when the ball is hit with a metal bat versus a wooden bat the speed of the baseball is higher off the metal bat. The ball has been shown to travel farther when using a robot batter to get the same bat speed every time with the metal bat

Q:is aluminum a strong metal?: No, it is a very soft metal. However for a sheath it will likely be fine, unless you intend on practicing using the sheath for blocking as some Samurai used it for.

Q:Chemistry Question: Aluminum Production?: Bauxite is dissolved in NaOH to remove impurities and form aluminum hydroxide; the aluminum hydroxide is then precipitated out, and water is removed to produce pure aluminum oxide (alumina). In aluminum production, alumina (Al2O3) is dissolved in molten cryolite (Na3AlF6). This molten mixture is then placed in a container with graphite electrodes (cathode and anode are both graphite). The molten mixture serves as the electrolyte. At the cathode: Al3+ (l) + 3e- ---- Al (l) Aluminum ions gather electrons to form aluminum metal, which is liquid due to the high temperatures. The molten metal sinks to the bottom of the container, and is piped off. At the anode: 2O2- (l) --- O2 (g) + 4e- The oxide ions from alumina lose their electrons to form oxygen gas.

Q:aluminum for thermite?: In 35+ years of demonstrating the thermite reaction, I have used fine aluminium powder to quite visible small bits. The proportions don't seem too critical, but try and keep near the amounts represented by the balanced eqtn. The difficult bit is getting the wretched stuff to ignite. With some mixes several strands of magnesium ribbon as fuse still wouldn't get it to ignite. I found a pile of 'ignition powder' at the base of the Mg often helped. There was a good commercial one available in the UK but I often made one up, main ingredients barium peroxide and magnesium powder, about 50/50. Needless to say, ignite with this mix where you won't breathe any nasty fumes. To get a good result, if I didn't use a proper crucible, I shaped one of Al foil about the capacity of 2-3 eggcups. This was put on sand in a big coffee tin, then more sand added to fill round the sides. This would give a good amount of iron. I once made the mistake of rushing in too quickly to get out the red hot iron.... and completely melted the ends of a large pair of Nickel tongs!

Q:Aluminum's differences?: Well there's many ways to do this but I would think the easiest way would be to weigh the two metals and aluminum will be lighter.

Q:Is there any difference between wooden crutches and aluminum?: Aluminum's are lighter and adjust more easily. To set the length on woodies, have have to twist off the wing nuts, position the lower end into the rods and replace and tighten the bolts. Aluminum's are adjusted merely by pressing the lock pins.

Q:Why the end of the aluminum coil will have a yellow spot?: Without coolant processing one, to see if there is no stain, so you can engage in removal of cooling liquid is not interference. Blank surface should have a layer of alumina film processing, heat, such conditions should make the cooling liquid and the alkaline layer friction reaction

Get An Instant Quotation

info@wwalu.com

For all inquiries, please fill in the form below (* are required) to send us a brief message, and we will get back to you as soon as possible.